TRG Products PHONE 1-800-3BRIWAX (1-800-327-4929) FAX 843/342-2824
|
|
Danish Oil • Teak Oil • Friction Polish • French Polish • Water-Based Wood Dye • Staynwax Liquid Shellac Sanding Sealer • Methlated Spirits Material Safety Data Sheets (MSDS) for all products. This product is a blend of oils and resins that seals and finishes a wide variety of woods without leaving a surface film that can be chipped or scratched. Apply with a soft cloth to a well-sanded surface. Apply two or three coats for a beautiful finish. After curing apply Briwax for a softer sheen. Also available in 5 Litre containers. Minimum order: 6-16 oz. cans or 1-5 litre container.
Safety information: See the MSDS sheet
|
Send mail to webmaster@briwax-trg.com with questions or comments about this web site. |
Teak oil is a blend of oils that will penetrate, seal and finish a wide variety of woods. It is specially formulated for teak, which is difficult to finish. It is suitable for interior and exterior surfaces. Available in 16 oz. and 5 litre. 
This shellac base formula produces a quick and easy finish to lathe turned pieces. It is applied with a soft cloth or pad directly to the wood. A shellac finish can be built up so further applications will give a depth of sheen that is hard to duplicate by any other finish. Available in 16 oz containers.
Best quality French Polish. Available in 16 oz. and 5 liter. French Polish is the foremost finish for quality furniture. It brings alive the magnificent texture and appearance of hardwoods unattainable by any other finish. If it is regularly waxed it will attain a depth and mellowness which can only be seen on the most expensive and cherished antiques. 
This dye is produced by using a range of high quality, lightfast dye stuffs. Compatible with most known finishes. The colors can be intermixed for color matching. Apply with a rag directly to the wood. More applications will intensify the color. 
This water based formula combines stain, sealer and finish in one product. Apply by rag or brush to produce an aged effect on new pine. The look achieved is very similar to caustic stripped old pine. Available in 16 oz. containers.
This fine shellac based product is ideal for sealing the pores of wood. It comes as a 4 lb. cut and can be diluted with denatured alcohol to 3 lb., 2lb. and also down to a wood conditioner. Used by master finisher's to body up prior to French Polishing. Used prior to waxing will increase the sheen level of a wax finish. Also available in 5 litre. 
