Step 1: This solid maple stool will be dyed with Briwax Water Based Dye. Using rubber gloves is highly recommended.
Step 2: Seal the dye with Briwax Shellac Sanding Sealer
Step 3: Rub out the Shellac Sanding Sealer with 400 grit paper.
Step 4: Apply Clear Briwax with 0000 Steel Wool.
Water Based Wood Dyes can be combined to create almost any color in the rainbow.
We're getting ready to dye these chairs
These two chairs were dyed using the steps outlined above.
Note how the grain of the wood shows through the dye.
Here's a stool that would be perfect in the Georgia Tech market.
© 2009-2013 TRG Products Contact Me